Analysis of schematics power sources of mutual traction load electromachines

Authors

  • А. М. Афанасов Dnepropetrovsk National University of Railway Transport named after academician Lazaryana, Ukraine

DOI:

https://doi.org/10.15802/etr.v0i7.42321

Keywords:

traction electric machine, testing, mutual loading, power source, transformer, rectifier, inverter

Abstract

The problems of rational choice schematics sources of electrical and mechanical power supply systems for the mutual loading traction electric machines. The analysis of possible sources of technical performance voltage and current sources of mechanical torque and angular velocity. The analysis considered both static and rotating converters of electric power.

Rational use of alternative is proposed to determine the criteria such as: maximum energy efficiency of electric system load mutual; minimum capital expenditures for new or upgrading existing test stations; possibility of carrying out the program of acceptance testing of electric traction. Shown that rationality option that is selected is determined by the nominal values of traction electric cars that are tested and accepted scheme of their mutual loading. The possibility to select as a rational option sources of electric power rotating converters.

The analysis can be used in the design of stations for receiving and acceptance testing of electrical machines traction and multiple units of the main industrial and transport.

Author Biography

А. М. Афанасов, Dnepropetrovsk National University of Railway Transport named after academician Lazaryana

Department of electrorolling stock of railways

References

ГОСТ 2582-81. Машины электрические вращающиеся тяговые. [Текст] / Государственный стандарт СССР. – М.: Издательство стандартов, 1981. – 50 с.

Правила ремонту електричних машин електровозів і електропоїздів. ЦТ-0063 [Текст]. – К.: Ви-давнічий дім «САМ», 2003. – 286 с.

Жерве, Г. К. Промышленные испытания электрических машин / Г. К. Жерве. – Л. : Энергоатомиздат, 1984. – 408 с.

Афанасов, А. М. Системы взаимного нагружения тяговых электрических машин постоянного и пульсирующего тока: монография / А. М. Афанасов. – Д.: Изд-во Маковецкий, 2012. – 248 с.

Бурков, А. Т. Электронная техника и преобразователи : учеб. для вузов ж.-д. трансп. / А. Т. Бурков. – M.: Транспорт, 1999. – 464 с.

Автоматизированный электропривод / под ред. И. Ф. Ильинского. – М.: Энергоиздат, 1990. – 544 с.

REFERENCES

GOST 2582-81. Mashiny elektricheskie vrashchayushchiesya tyagovye [Rotating electrical machines traction] / Gosudarstvennyy standart SSSR – State Standard of the USSR. Moscow, Publisher standards, 1981. 50 p.

Pravila remontu elektrichnikh mashin elektrovozіv і elektropoїzdіv. TsT-0063 [Rules repair electric cars and electric trains. TsT-0063]. Kiev, Publishing house «SAM», 2003. 286 р.

Zherve G. К. Promyshlennye ispytaniya elektricheskikh mashin [Industrial testing of electrical machines]. Leningrad, Energoatom Publ., 1984. 408 p.

Afanasov А. М. Sistemy vzaimnogo nagruzheniya tyagovykh elektricheskikh mashin postoyannogo i pulsiruyushchego toka [System of mutual loading traction electric machines constant and ripple current]. Dnipropetrovsk. Publishing house of Makovetsky, 2012. 248 р.

Burkov A. T. Elektronnaya tekhnika i preobrazovateli [Electronic technics and converters]. Moscow, Transport Publ., 1999. 464 p.

Ilinskiy I. F. Avtomatizirovannyy elektroprivod [Automated electric drive]. Moscow, Energoizdat, 1990. 544 p.

Published

2015-05-07

Issue

Section

Electric Rolling Stock