Synthesis of systems of mutual loading of drive motors of direct and pulsing current

Authors

  • А. М. Афанасов Днепропетровский национальный университет железнодорожного транспорта им. акад. В. Лазаряна, Ukraine
  • С. В. Арпуль Днепропетровский национальный университет железнодорожного транспорта им. акад. В. Лазаряна, Ukraine
  • А. Е. Друбецкий Днепропетровский национальный университет железнодорожного транспорта им. акад. В. Лазаряна, Ukraine

DOI:

https://doi.org/10.15802/etr.v0i13.117823

Keywords:

acceptance tests, mutual loading, traction motor, synthesis of mutual loading schemes

Abstract

The paper presents the principle of synthesis of mutual load schemes, optimal from the point of view of the minimum power consumption for coating losses in the machines under test.

The condition for ensuring mutual loading is the flow of current through the windings of the tested machines and the rotation of their rotors. For the theoretical substantiation of the provision of these conditions, universal circuits for converting electrical and mechanical power were compiled. On the basis of these schemes, analytical dependences of the conditions of current flow and balance of moments in the mutual loading system were derived.

According to the expression obtained, the principle of synthesis of mutual loading schemes is formulated and a number of possible schemes are compiled.

Author Biographies

А. М. Афанасов, Днепропетровский национальный университет железнодорожного транспорта им. акад. В. Лазаряна

Кафедра «Электроподвижной состав железных дорог»

С. В. Арпуль, Днепропетровский национальный университет железнодорожного транспорта им. акад. В. Лазаряна

Кафедра «Электроподвижной состав железных дорог»

А. Е. Друбецкий, Днепропетровский национальный университет железнодорожного транспорта им. акад. В. Лазаряна

Кафедра «Электроподвижной состав железных дорог»

References

Afanasov, A.M. Sintez vzaimnoy nagruzki tyagovykh elektromashin postoyannogo i pulsiruyushego toka [Synthesis of mutual load of traction electromachines of direct and pulsating current] Proceedings of the V International Scientific and Practical Conference "Problems and Perspectives of Development of Transport Systems in the Conditions of the Reform of Railway Transport: Management, Economics And technology. " - Kyiv, 2011. - S. 6.

Saveliev, I.V. Kurs obshey fiziki (v 5 knigakh) [Course of General Physics (in 5 books)] M.: AST: Astrel, 2005.

Etkin, V.A.Energodinamika [Energodonamics (synthesis of energy transfer and transformation theories)] SPb .: Science, 2208. - 409 p.

Kogan, I.Sh. O vozmjnom printsipe sistematizatsii fizcheskih velichin [The possible principle of the system of quantization of physical quantities] Legislative and Applied Metrology. -1998. - No. 5. - P. 30-43.

Atabekov G.I., Timofeev A.B., Hochrikov S.S. Teoreticheskie osnovy elektrothniki [Theoretical foundations of electrical engineering. At 3 h Part 2, Nonlinear Chains] M. Leningrad: State Power Publishing House. 1962. - 128 p.

Bessonov L. A. Teoreticheskie osnovy elektrothniki [Theoretical foundations of electrical engineering. Electric circuits] M .: Gardariki, 2002. - 638 p.

Yablonsky A.A., Nikiforova V.M. Kurs teoreticheskoy mekhaniki [Course of Theoretical Mechanics 16th ed.] M.: KnoRus, 2011. - 608 pp.

Targ S.M. Kratkiy kurs teoticheskoy mehaiki [Short course of theoretical mechanics: Textbook for high schools. 18th ed.] M .: Higher school, 2010. - 416 pp.

Atabekov, G.I. Osnovy teorii tsepey [Basics of the theory of chains] M.: Energiya, 1969. - 412 p.

Afanasov, A.M. Elektromekhanicheskie printsipy obespecheniya vzaimnoy nagruzki elektricheskih mashin postoyannogo toka [Electromechanical Principles for Provision of Interconnection of Electric-Electric Direct-current Machines] Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan]. - 2009. - issue. 27. - pp. 42-46.

Published

2017-12-07

Issue

Section

Electric Rolling Stock