Theoretical background of balancing supply voltage and justification of structure of symmetrical unit for power supply of auxiliary motors of electric trains ER9M

Authors

  • О. Ю. Балійчук Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Lazaryan St., 2, Dnipropetrovsk, Ukraine, 49010, tel.: +38 (056) 373-15-47, Ukraine https://orcid.org/0000-0003-0119-1446

DOI:

https://doi.org/10.15802/etr.v0i11.83755

Keywords:

auxiliary machine, AC electric multiple-unit train, balancing the system of line voltages, symmetrical unit

Abstract

The power supply voltage of auxiliary machines of multiple-unit train ER9M series is characterized by the considerable voltage asymmetry, especially in condition which differ from nominal. Emerging with additional overheating of the stator windings of auxiliary machines cause damage to their insulation and premature failure.

Was made the analysis of the known methods of balancing the system of line voltages in order to find those that may be apply in the system of auxiliary motors of AC electric multiple-unit train. Was shown the possibility of balancing electric system AC line voltage of auxiliary machines by means of individual controlled capacitive units discret action. Was developed the structure of the capacitor units to provide power supply to auxiliary electric machines of multiple-unit train ER9M series, which would allow to maintain the allowable voltage unbalance factor of importance in a real operation, and was developed the method of determining the parameters of balancing elements of the named device.

The study found that the required capacity of the capacitor banks must be 50 ... 1900 uF for full voltage balancing with the unbalance coefficient 2...14 percent  in the supply circuits of auxiliary machines.

Author Biography

О. Ю. Балійчук, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Lazaryan St., 2, Dnipropetrovsk, Ukraine, 49010, tel.: +38 (056) 373-15-47

Department of Electrical Engineering and Electromechanics

References

Dancis Ja.B., Zhilov T.M. Emkostnaja kompensacija reaktivnyh nagruzok moshhnyh tokopriemnikov promyshlennyh predprijatij [The capacitive compensation of reactive loads of powerful industrial enterprises for the current collectors]. Leningrad, Energija Publ., 1980. 176 p.

Kuznecov V.G., Grigor'ev A.S., Daniljuk V.B. Snizhenie nesimmetrii i nesinusoidal'nosti naprjazhenija v jelektricheskih setjah [Reduction of asymmetry and non-sinusoidal voltage in electrical networks]. Kiev, Naukova dumka Publ., 1992. 239 p.

Baliychuk O.Yu. Prystriy dlya zabezpechennya symetriyi zhyvlennya dopomizhnykh mashyn elektropoyizdiv zminnoho strumu [The device for symmetry of power supply of auxiliary motors of AC electric trains] Patent UA, no. u201408026, 2014.

Zhezhelenko I.V., Saenko Ju.L. Pokazateli kachestva jelektroenergii i ih kontrol' na promyshlennyh predprijatijah [Quality parameters of power and control of industrial plants]. Moscow, Energoatomizdat Publ., 2000. 252 p.

Nekrasov O.A. Vspomohatelnye mashyny elektropodvyzhnoho sostava peremennoho toka [Auxiliary electric machines of the electric rolling stock AC]. Moscow, Transport Publ., 1967. 168 p.

Voldek A.I. Elektricheskie mashiny [Electrical machines]. Leningrad, Energiya Publ., 1978. 832 p

Published

2016-11-23

Issue

Section

Electric Rolling Stock